是阿,無法program!!!(使用內部MCLR)
Why?
Thanks.

你好:
如圖可解決,如需詳細說明,請看Manual或請版主大人解說.
Thanks.

Attach file:

---

  (0.00 KB)

大家好:
個人使用ICD3有以下缺點:
1.無供應電源:如果我想直接在板上燒完IC後觀看結果是不行的
,所以我只好自己外接(當然板上無接大驅動).
2.ICD3的LED顯示不明確:因LED用整支透明的朔膠柱套住,所以 LED光會相互干擾,導致顏色不對,所以只好自己套上熱縮來解決.
3.用ICD3設斷點模擬停止後,假設關閉電源後在打開,則無法繼續剛剛的斷點(這點比較困擾)?我記得ICD2不會這樣.

請大家參考.Thanks.

大家好:
使用ICD2除錯,我使用BANK : 0x200 ~ 0x3ff(lkr中設同一區),
其中有array[50]在0x200 ~ 0x2ff 中,而有一count在0x303,
那麼問題來了,count=array[2]+5;使用ICD2設斷點,在單步執行後看結果,結果是count=0;然後我看反組譯是count的BANK
沒切換依然在movlb 2,我覺得很奇怪?compiler有問題?
當然我可以自行調整,但這樣就失去使用compiler的意義了!
我一直覺得我使用8051好像都不會有太大的問題,從使用PIC的
compiler之後總覺得礙手礙腳,不知該怎麼說...!

Thanks.

Sorry:
像PICos18 or Ucos II.
Thanks.

大家好:
如題,請發表你寶貴的意見.
Thanks.

大家好:
如題,不知有沒有source code?
Thanks.

大家好:
使用16F877A,在其中一個.C檔有C & ASM混合的一些程式,
錯誤顯示如下:
/*************************************/
HI-TECH PICC STD COMPILER (Microchip PICmicro) V9.60PL3
Copyright (C) 1984-2009 HI-TECH SOFTWARE
Serial number: HCPIC-36668
this licence will expire on Wed, 12 Dec 2029
Error [477] ; . fixup overflow in expression (location 0x1A2 (0x186+28), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x1A8 (0x186+34), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x25C (0x23A+34), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x262 (0x23A+40), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x268 (0x23A+46), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x46E (0x440+46), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x474 (0x440+52), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x47A (0x440+58), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x480 (0x47C+4), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x486 (0x47C+10), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x68 (0x68+0), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x68 (0x68+0), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x68 (0x68+0), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x68 (0x68+0), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x68 (0x68+0), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x68 (0x68+0), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x68 (0x68+0), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x68 (0x68+0), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x68 (0x68+0), size 2, value 0xFBE)
Error [477] ; . fixup overflow in expression (location 0x68 (0x68+0), size 2, value 0xFBE)
/*************************************/
是STD和PRO版本的關係嗎?
Thanks.

DS1307 是 Dallas 的產品，恕刪此內容。

大家好:
如題,請問有這樣的translator software嗎?
Thanks.