• slider image 442
  • slider image 477
  • slider image 479
  • slider image 480
  • slider image 481
  • slider image 482
:::


Browsing this Thread:   1 Anonymous Users






Re: ICD4無法正常工作
#7
中級會員
中級會員


查看用戶資訊
更新一下 後來發現只要用V5.40的XIDE
連結ICD4時 都會被更改軟體 , 然後就無法自測
必須用V5.45的XIDE才能更改正確軟體

發表於: 2021/7/12 16:07
Twitter Facebook Google Plus Linkedin Del.icio.us Digg Reddit Mr. Wong 頂部


Re: ICD4無法正常工作
#6
中級會員
中級會員


查看用戶資訊
感謝T大和G大
我用ipe更新icd4軟體版本後 再開啟ide自測可正常執行了
thx

發表於: 2021/6/16 18:51
Twitter Facebook Google Plus Linkedin Del.icio.us Digg Reddit Mr. Wong 頂部


Re: ICD4無法正常工作
#5
高級會員
高級會員


查看用戶資訊
我以前也有碰過這樣問題
你要不要先用MPLAB X IPE 看是否能連接
如果你的ICD4 F/W版本比較舊,它連接時會自動下載F/W
更新後,要先拔掉ICD4和關掉IPE,再重開IPE,再連接ICD4。看看是否能燒錄

發表於: 2021/6/16 17:03
Twitter Facebook Google Plus Linkedin Del.icio.us Digg Reddit Mr. Wong 頂部


Re: ICD4無法正常工作
#4
資深會員
資深會員


查看用戶資訊
以下跟您的狀況雷同, 可以參考一下.

https://www.microchip.com/forums/m1016421.aspx

發表於: 2021/6/16 16:53
不要盲目地從一堆“嘗試”中去找答案;將時間用來找尋“最正確”的方法。
Twitter Facebook Google Plus Linkedin Del.icio.us Digg Reddit Mr. Wong 頂部


Re: ICD4無法正常工作
#3
中級會員
中級會員


查看用戶資訊
T大好

我沒有供電給自測板
另外有把power target circuit from ICD4這個選項關閉或開啟 狀況都一樣
重開xide也一樣

不會是買到機王了吧qq

發表於: 2021/6/16 16:13
Twitter Facebook Google Plus Linkedin Del.icio.us Digg Reddit Mr. Wong 頂部


Re: ICD4無法正常工作
#2
高級會員
高級會員


查看用戶資訊
看錯誤訊息"The configuration is set for the tool to provide power to the target but there is voltage already detected on VDD. This is a conflict. Please ensure your target is not supplying voltage to the tool and try again."

大概意思是說你的ICD4設定供應電源給目標板,但是偵測到你的目標板有電源供應,
一個方法就是把ICD4設定改成不要電源供應給目標板,另一方法就是把目標板電源供應移除
如果還是無法解決,就先關閉MPLAB X,再重新啟動!

發表於: 2021/6/16 15:10
Twitter Facebook Google Plus Linkedin Del.icio.us Digg Reddit Mr. Wong 頂部


ICD4無法正常工作
#1
中級會員
中級會員


查看用戶資訊
原本是在MPLAB XIDE v5.40 使用ICD3 都可正常使用
最近買了一台ICD4
反而都連不到device
接上 ICD TEST INTERFACE MODULE 自測
顯示結果如下
The configuration is set for the tool to provide power to the target but there is voltage already detected on VDD. This is a conflict. Please ensure your target is not supplying voltage to the tool and try again.

請問是哪裡有設定錯誤嗎

發表於: 2021/6/16 14:12
Twitter Facebook Google Plus Linkedin Del.icio.us Digg Reddit Mr. Wong 頂部







You can view topic.
不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.

[進階搜尋]


:::

Microchip連結

https://www.facebook.com/microchiptechnologytaiwan/
http://www.microchip.com.tw/modules/tad_uploader/index.php?of_cat_sn=13
https://mu.microchip.com/page/tmu
http://elearning.microchip.com.tw/modules/tad_link/index.php?cate_sn=1
https://page.microchip.com/APAC-PrefCenters-TW.html
http://www.microchip.com/
http://www.microchip.com/treelink
http://www.microchipdirect.com/
http://www.microchip.com.cn/newcommunity/index.php?m=Video&a=index&id=103
http://www.microchip.com.tw/modules/tad_uploader/index.php?of_cat_sn=2
http://www.microchip.com.tw/Data_CD/eLearning/index.html
http://www.microchip.com.tw/RTC/RTC_DVD/
https://www.microchip.com/development-tools/
https://www.youtube.com/user/MicrochipTechnology
[ more... ]

教育訓練中心

!開發工具購買
辦法說明 [業界客戶] [教育單位]
----------------------------------
!校園樣品申請
辦法說明 [教師資格] [學生資格]
----------------------------------