#include
#include
#include

#pragma config FEXTOSC = HS // External Oscillator mode selection bits (HS (crystal oscillator) above 4MHz; PFM set to high power)
#pragma config RSTOSC = EXT1X // Power-up default value for COSC bits->EXTOSC operating per FEXTOSC bits
#pragma config BOREN = ON // Brown-out reset enable bits (Brown-out Reset Enabled, SBOREN bit is ignored)
#pragma config WDTE = OFF // WDT operating mode (WDT Disabled, SWDTEN is ignored)
#pragma config CP = OFF // UserNVM Program memory code protection bit (Program Memory code protection disabled)
#pragma config CPD = OFF // DataNVM code protection bit (Data EEPROM code protection disabled)
void Initialize(void);

void main(void) {
Initialize();

while (1) {

}

return;
}

void Initialize(void) {
OSCCON1 = 0x70;
OSCFRQ = 0x04;
TRISE = 0x07;
ANSELE = 0x06;
TRISC = 0xFB;
RC2PPS = 0x09;
T2CLKCON = 0x01;
T2HLT = 0x00;
T2RST = 0x00;
T2PR = 0x72;
T2TMR = 0x00;
PIR4bits.TMR2IF = 0;
T2CON = 0x8F;
CCP1CON = 0x8F;
CCPR1H = 0x00;
CCPR1L = 0x90;
CCPTMRS0bits.C1TSEL = 0x1;
}

已經摸出如何輸出波行了 但想知道如何一次輸出兩個波型