Browsing this Thread:
3 Anonymous Users
Topic options
View mode
舊的在前
Re: MPLAB IDE V7.42+ICD 2
版主
Joined
: 2004/4/30 10:53最後登入時間
: 2021/11/30 18:11
From CAE, Microchip
Group:
站務管理者 註冊會員
Level : 75
HP : 744 / 1861
MP : 5367 / 111189
EXP : 45
Look the problem is flash fail with b3. Please cosider to use another PIC18F2455.
發表於: 2006/9/27 18:00
MPLAB IDE V7.42+ICD 2
新會員
Joined
: 2006/6/19 11:34最後登入時間
: 2006/9/27 14:26
Group:
註冊會員
Level : 1
HP : 0 / 2
MP : 1 / 145
EXP : 10
Hi all; I use MPLAB IDE V7.42+ICD 2 to program target device. But has some error message. IC is 18f2455 MPLAB ICD 2 Ready Programming Target... ...Validating configuration fields ...Programming Program Memory (0x0 - 0x4BBF) Verifying... ...Program Memory ICD0161: Verify failed (MemType = Program, Address = 0x0, Expected Val = 0xEFB8, Val Read = 0xEFB0) ICD0275: Programming failed. If I press "erase target device" button then press "program target device",it program success. How can I config MPLAB IDE to avoid the error? Please help me. Thank you.
發表於: 2006/9/27 14:45
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.