:::
Browsing this Thread:
1 Anonymous Users
|
Re: APP023板使用
|
||||
|---|---|---|---|---|
|
資深會員
 
|
不清楚你用的是哪種組譯程式成功組譯的?
用 MPLAB 組譯結果一堆錯誤，不過，只要把 PCLATH, PCLATU, PORTE, TRISE, ADCON1, ADCON1, LATE 都改成大寫後就 OK 了。 ※ 內定情形下，MPLAB / MPASM 對變數名稱的大小寫是當作不同的！
發表於: 2007/2/2 17:15
|
|||
|
||||
|
APP023板使用
|
||||
|---|---|---|---|---|
|
新會員
|
我使用APP0023板 這只是測試PORTE燈明滅
但編譯成功 燒入卻不動做 請問下列哪裡有問題 謝謝 list p=18F8722 #include <p18F8722.inc> cblock 0x20 cnt cnt2 endc org 0x002A clrf pclath clrf pclatu goto init init: movlw .0 movwf porte movwf trise banksel adcon1 clrf adcon1,0 banksel porte D3: call delay comf late,f goto D3 delay: movlw .255 movwf cnt movwf cnt2 decfsz cnt,f goto $-1 decfsz cnt2,f goto $-3 return END
發表於: 2007/1/30 17:33
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
