Re: 关于UDP发送数据的一些请教.
|
||||
---|---|---|---|---|
新會員
|
谢谢啦.
發表於: 2008/12/16 19:38
|
|||
|
Re: 关于UDP发送数据的一些请教.
|
||||
---|---|---|---|---|
版主
|
請打電話給上海的 CAE Victor Wang (Tel: 86-21-5407-5319) 他比較有深入的研究。
發表於: 2008/12/16 8:40
|
|||
|
Re: 关于UDP发送数据的一些请教.
|
||||
---|---|---|---|---|
新會員
|
UP,up,请版主大人回答一下小弟的问题哦,谢谢拉
發表於: 2008/12/15 23:06
|
|||
|
Re: 关于UDP发送数据的一些请教.
|
||||
---|---|---|---|---|
版主
|
Microchip 上海 Office CAE 回答如下,如還有疑問請聯絡上海 CAE Victor Wang (Tel: 21-5407-5319)
According to UDPOpen function UDP_SOCKET UDPOpen( UDP_PORT localPort, NODE_INFO * remoteNode, UDP_PORT remotePort ); Where the ‘remoteNode’ is a pointer to the ‘NODE_INFO’ structure. ‘NODE_INFO’ contains the IP address and MAC address information of the remote node. So when call UDPOpen both the IP address and MAC address of the remote node should be provided.
發表於: 2008/12/12 15:09
|
|||
|
关于UDP发送数据的一些请教.
|
||||
---|---|---|---|---|
新會員
|
请教斑竹,我使用TCP/IP协议栈的UDP发送数据时遇到以下问题,当使用OPEN函数,将remoteNode这个参数取值为空时,可以正常发送广播数据,但是将这个参数制定为一个具体的IP地址时,数据不能正常发送,我想请教remoteNode这个参数如果指定为一个具体的IP地址的定义方法(例如定义为192.168.0.33),请斑竹指点.谢谢
發表於: 2008/12/11 23:10
|
|||
|