Re: 『求助』ICD2 抓不到16F690
|
||||
---|---|---|---|---|
高級會員
|
我用從icd2端自制5pin接頭,接到16f690上,腳位燒錄腳都有對應到全部pass,電源也有進去,是用picc內也有16f690的include~build也都成功....但就是.....抓不到....上次同樣方式測16f876a就ok~~
發表於: 2009/5/27 9:09
|
|||
|
Re: 『求助』ICD2 抓不到16F690
|
||||
---|---|---|---|---|
新會員
|
16F690要用ICD2的話要接轉接板喔,是不是沒有轉接板的問題??
發表於: 2009/5/26 19:17
|
|||
|
『求助』ICD2 抓不到16F690
|
||||
---|---|---|---|---|
高級會員
|
小弟在ICD2 DEBUG MODE 在ICD2 SETTINGS 裡的SELF TEST全部PASS ,POWER也在4.80V,CONFIGURE SELECT DEVICE
16F690 但就一直跑出下訊息 ICDWarn0088: A debug header is required in order to debug this part. Please make sure you are using the header part before continuing. Press OK to continue or Cancel to quit. ICDWarn0020: Invalid target device id (expected=0xA0, read=0x0) 找不出原因,可能會是CONFIGURATION BITS SET IN CODE. 錯誤嗎,我全部都OFF 掉,也沒用到什麼,OSCILLATOR HS...
發表於: 2009/5/26 16:40
|
|||
|