:::
Browsing this Thread:
1 Anonymous Users
|
PIC16F73無法ERASE
|
||||
|---|---|---|---|---|
|
新會員
 
|
如題,我用ICD2來開發,MPLAB為7.4,先前使用PIC16F72,燒錄都沒問題,後來因16F72程式寫不下,換成16F73,第一次可燒錄,
第二次燒錄就出現比對錯誤的問題, Erasing Target Device... ...Erase Succeeded MPLAB ICD 2 Ready Blank Checking... ...Program Memory ICD0161: Verify failed (MemType = Program, Address = 0x0, Expected Val = 0x3FFF, Val Read = 0x0) ...Device not blank MPLAB ICD 2 Ready 我改用手動控制,先ERASE再 BLANK CHECK,結果BLANK CHECK就沒過,我把IC拿到 HILO ALL-11上讀出來看全部都是0x00,因為我燒錄時有把保護 ENABLE,如此確定ICD2並沒有將16F73 ERASE,把MPLAB版本 換成7.41還是一樣的情形,把IC換回16F72清除與燒錄都沒問題, 再換回16F73還是一樣的結果,請問這是ICD2的問題還是MPLAB的問題?
發表於: 2006/7/19 23:50
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
