Browsing this Thread:
1 Anonymous Users
|
請幫忙測試MPLAB IDE!!!
|
|
資深會員
Joined
: 2007/8/17 11:15 最後登入時間
: 2023/4/24 17:08
Group:
註冊會員
Level : 24 HP : 0 / 586 MP : 243 / 28935 EXP : 47
|
大家好: 由於我補捉訊號置於PIC18f4423內部RAM中, 因資訊較多因此須用File Registers來看, 有使用ICD2執行過一次,那麼在移動時, 就有可能會發生如下錯誤訊息: ----------------------------------------------- MPLAB IDE發生問題,必須關閉,謹此致歉. ... ------------------------------------------------ 按下"不回報"鈕 出現如下訊息: ------------------------------------------------ "0x0261717e"指令參考的"0x05f690cc"記憶體. 該記憶體不能為"read".請按[確定]終止程式 ------------------------------------------------- 那麼我不補捉,隨便弄個程式下載至IC中, 觀看File Registers還是會有問題!!! MPLAB IDE V7.5 => 問題較少. MPLAB IDE V7.62 or V8.02較常發生. 不知是不是MPLAB IDE本身問題呢? 請問是否有解?
發表於: 2008/2/20 14:41
|
|
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.