Re: 請問有人會使用MPLAB ICD2 燒錄PIC18Fxxxx晶片嗎???
|
||||
---|---|---|---|---|
版主
|
http://ww1.microchip.com/downloads/en/DeviceDoc/39592e.pdf
先看一下 PIC18F2320 Programming Specification 裡的說明,只要使用 RB7 & RB6 & MCLR & Vdd & Vss 等腳位就可以了。 燒錄時不要啟動/使用 Low Voltage Programming Function ,這時 RB5 就不需理會。
發表於: 2008/2/29 15:31
|
|||
|
Re: 請問有人會使用MPLAB ICD2 燒錄PIC18Fxxxx晶片嗎???
|
||||
---|---|---|---|---|
新會員
|
ICD2方面
Pin 1. NOT USED Pin 2.PGC Pin 3.PGD Pin 4.GND Pin 5.VCC Pin 6.MCLR IC方面要拉出 PGC , PGD , MCLR , VCC , GND
發表於: 2008/2/28 10:19
|
|||
|
請問有人會使用MPLAB ICD2 燒錄PIC18Fxxxx晶片嗎???
|
||||
---|---|---|---|---|
新會員
|
我用的chip型號為PIC18F2320,使用的燒錄器為MPLAB ICD2.
MPLAB ICD2的燒錄接腳有6PIN.有哪位高手知道我要分別對應到PIC18F2320的哪幾PIN腳位?? 或是要燒錄PIC18F2320要拉出哪幾PIN腳位???
發表於: 2008/2/27 18:17
|
|||
|