Re: 請問程式有修改而MPLAB所顯示的checksum為何不會改變?
|
||||
---|---|---|---|---|
版主
|
PIC 的 checksum 計算各有不同,詳細的計算方式須看該元件的 Programming Specification 裡有關 Checksum 的計算公式。
附件為 PIC18Fxxxx的燒錄規格,參考 5.6 Checksum Computation 即可了解。 http://ww1.microchip.com/downloads/en/DeviceDoc/39622k.pdf 還有妳是用那一顆 PIC 及那一版的 MPLAB IDE,映象中舊版的 MPLAB IDE 在使用 PIC18FxxJxx 時會有 checksum 的問題。
發表於: 2009/4/29 15:43
|
|||
|
請問程式有修改而MPLAB所顯示的checksum為何不會改變?
|
||||
---|---|---|---|---|
資深會員
|
大家好:
如題, 1.請問是MPLAB那個地方沒有勾選嗎? 2.User ID Memory對話盒中的Use Unprotected Checksum 打勾與沒打勾有何差別? Thanks.
發表於: 2009/4/29 11:09
|
|||
|