-----------------------------------------------
出現15個Error訊息
Debug build of project `D:\program\a4.mcp' started.
Preprocessor symbol `__DEBUG' is defined.
Fri Sep 25 20:21:05 2009
----------------------------------------------------------------------
Clean: Deleting intermediary and output files.
Clean: Done.
Executing: "D:\Microchip\MPASM Suite\MPASMWIN.exe" /q /p16F877A "a4.asm" /l"a4.lst" /e"a4.err" /d__DEBUG=1
Error[105] D:\PROGRAM\A4.ASM 1 : Cannot open file (Include File "p16f877a.h" not found)
Error[122] D:\PROGRAM\A4.ASM 2 : Illegal opcode (ECGbufh)
Error[122] D:\PROGRAM\A4.ASM 3 : Illegal opcode (IDX)
Error[122] D:\PROGRAM\A4.ASM 4 : Illegal opcode (SYSTEMinit)
Error[122] D:\PROGRAM\A4.ASM 5 : Illegal opcode (Delay_x_mS)
Error[122] D:\PROGRAM\A4.ASM 6 : Illegal opcode (Delay_1mS)
Error[122] D:\PROGRAM\A4.ASM 7 : Illegal opcode (TMR1H_Cary)
Error[122] D:\PROGRAM\A4.ASM 8 : Illegal opcode (OK)
Error[122] D:\PROGRAM\A4.ASM 9 : Illegal opcode (ex_int_flag)
Error[122] D:\PROGRAM\A4.ASM 10 : Illegal opcode (interrupt)
Error[108] D:\PROGRAM\A4.ASM 11 : Illegal character ({)
Error[113] D:\PROGRAM\A4.ASM 13 : Symbol not previously defined (INTF)
Error[128] D:\PROGRAM\A4.ASM 13 : Missing argument(s)
Error[113] D:\PROGRAM\A4.ASM 13 : Symbol not previously defined (中斷觸發)
Error[128] D:\PROGRAM\A4.ASM 13 : Missing argument(s)
Halting build on first failure as requested.
----------------------------------------------------------------------
Debug build of project `D:\program\a4.mcp' failed.
Preprocessor symbol `__DEBUG' is defined.
Fri Sep 25 20:21:06 2009
----------------------------------------------------------------------
BUILD FAILED

將溫度(數值) 心電、呼吸變化(圖形)
取值做AD轉換

不知是哪錯了 一直組譯不過去....
#include <p16f877a.h>
char ECGbufh,ECGbufl,Wbufh,Wbufl,Tmrh,Tmrl,Alltmr,breathebufh,breathebufl;
int IDX;
void SYSTEMinit(void); //副程式
void Delay_x_mS(int); //定義延遲副程式
void Delay_1mS(void);
char TMR1H_Cary=0;
double OK;
char ex_int_flag=0; //中斷旗標
void interrupt isr_Sevr ( void )
{

if(INTF==1) //中斷觸發
{
INTF=0;
if(ex_int_flag==0) //
{
TMR1ON=1; //1=啟用Timer1
ex_int_flag=1; //

}
else
{
TMR1ON=0; //Timer1歸回初始值
ex_int_flag=0;
Tmrh=TMR1H;
Tmrl=TMR1L;
Alltmr=TMR1H_Cary;
TMR1H=0x00;
TMR1L=0x00;
TMR1H_Cary=0X00;

}
}
else if(TMR1IF==1)
{
TMR1IF=0;
TMR1H_Cary++;
if(TMR1H_Cary==0x00)
{
TMR1H=0X00;
TMR1L=0X00;
ex_int_flag=0;
TMR1ON=0;
}
}

}
void main (void) //主程式
{
SYSTEMinit(); //晶片初始化設定

while(OK < 1000)
{ Delay_x_mS(2);
ADCON1=0x80; //1000 0000 右對齊;FOSC/32;Channel-0(AN0);0=A/D轉換模塊關閉和不消耗工作電流
ADCON0=0x89; //1000 1001 右對齊;FOSC/32;Channel-1(AN1);1=A/D轉換模塊通電
IDX=0X00;
Delay_x_mS(2);
ADGO=1; //開始A/D轉換

while(!(ADIF==1 && IDX==0));

Wbufh=ADRESH; //Wbufh=A/D轉換結果存到暫存器高位元
Wbufl=ADRESL; //Wbufl=A/D轉換結果存到暫存器低位元
ADIF=0; //

while(!(ADIF==0 && IDX==0));

ADCON0=0x91; //1001 0001 FOSC/32;Channel-2(AN2);1=A/D轉換模塊通電
Delay_x_mS(2);
ADGO=1; //開始A/D轉換

while (!(IDX==0 && TRMT==1)); //

TXREG=0xF0; //送溫度檔頭傳到TXREG(傳送暫存器)

while(!(IDX==0 && TRMT==1));

TXREG=0xFF; //溫度檔頭傳到TXREG(傳送暫存器)

while(!(IDX==0 && TRMT==1));

TXREG=Wbufh; //將溫度高位元資料傳到TXREG(傳送暫存器)

while(!(IDX==0 && TRMT==1));

TXREG=Wbufl; //將溫度低位元資料傳到TXREG(傳送暫存器)



IDX=0X01; //
OK++;
ADIF=0;

}

while(1)
{
ADCON1=0x80; //1000 0000 FOSC/32;Channel-0(AN0);0=A/D轉換模塊關閉和不消耗工作電流
ADCON0=0x81; //1000 0001 FOSC/32;Channel-2(AN2);1=A/D轉換模塊通電
Delay_x_mS(2);
ADGO=1; //開始A/D轉換
IDX=0X00;

while(!(ADIF==1 && IDX==0));

ECGbufh=ADRESH; //將轉換結果暫存器高位元傳到ECGbufh
ECGbufl=ADRESL; //將轉換結果暫存器低位元傳到ECGbufl
ADIF=0;

while (!(IDX==0 && TRMT==1));

TXREG=0xF1; //將檔頭傳到TXREG(傳送暫存器)

while(!(IDX==0 && TRMT==1));

TXREG=0xFF; //將檔頭傳到傳到TXREG(傳送暫存器)

while(!(IDX==0 && TRMT==1));

TXREG=ECGbufh; //將ECG高位元資料傳到TXREG(傳送暫存器)

while(!(IDX==0 && TRMT==1));

TXREG=ECGbufl; //將ECG低位元資料傳到TXREG(傳送暫存器)


while(!(IDX==0 && TRMT==1));

TXREG=breathebufh; //將呼吸高位元資料傳到TXREG(傳送暫存器)

while(!(IDX==0 && TRMT==1));

TXREG=breathebufl; //將呼吸低位元資料傳到TXREG(傳送暫存器)


while(!(IDX==0 && TRMT==1));

TXREG=Tmrh; //將計時器高位元資料傳到TXREG(傳送暫存器)

while(!(IDX==0 && TRMT==1));

TXREG=Tmrl; //將計時器低位元資料傳到TXREG(傳送暫存器

while(!(IDX==0 && TRMT==1));
TXREG=Alltmr;

IDX=0X01;
ADIF=0;

}

}
void SYSTEMinit(void)
{
OK=0x00;
IDX=0X00;
TRISA=0XFF;
TRISB0=1;
SPBRG=0x23;
TXSTA=0x24;
RCSTA=0x80;
SYNC=0;
BRGH=1;
SPEN=1;
TXEN=1;
Tmrh=0X00;
Tmrl=0X00;
Alltmr=0x00;
ECGbufh=0x00;
ECGbufl=0x00;
Wbufh=0x00;
Wbufl=0x00;
INTCON=0XD0;
TMR1IE=1;
TMR1H=0X00;
TMR1L=0X00;
T1CON=0X30;
}
void Delay_x_mS(int N_mS)
{
int Loop_mS ;

for ( Loop_mS = 0 ; Loop_mS < N_mS ; Loop_mS++ )
{
Delay_1mS();
}

}

//*** Delay 1mS with 16MHz crystal

void Delay_1mS(void)
{
int Del_1mS;

for (Del_1mS = 0 ; Del_1mS < 199 ; Del_1mS ++ )
{
asm("nop");
asm("nop");
}