Browsing this Thread:
1 Anonymous Users
|
dsPIC 30F4011 使用app020 產生address error trap
|
|
中級會員
Joined
: 2004/5/17 9:20 最後登入時間
: 8/2 9:12
Group:
註冊會員
Level : 6 HP : 0 / 148 MP : 21 / 8866 EXP : 95
|
因使用dsPIC 30F4011 使用app020 demoboard 產生address error trap debug 時有些問題如下 1. 將程式program至demoboard上run 約2秒產生address error trap 2. 將程式利用icd2在debug模式直接 run 約2秒一樣產生address error trap 3. 將程式利用icd2在debug模式在主程式設定中斷點後run每次都可以停在中斷點上不會產生address error trap 4. 利用debug 觀看W14,w15 堆疊暫存器當進入MAIN()時 w14:09a2 , w15:09a4 5. 進入外部斷時w14:09B2 , w15:09B2 6. 進入AD中斷時w14:09a2 , w15:09ac 7. 進入TIMER中斷時w14:09BE , w15:09BE 8. 進入address error trap中w14:09BA, w15:09BA Q1 : 因程式BUG產生address error trap不知是否和這些有關 Q2 : W14不是STACK FRAME POINT 它會隨程式中斷改變嗎 請有經驗大大幫忙! 謝謝!
發表於: 2008/3/28 18:46
|
|
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.