Re: 如何使用PIC16F913來USB程式
|
||||
---|---|---|---|---|
版主
|
如果不是使用 PIC16F913 來推 Segmented LCD 的話,那就要考路慮使用一顆 USB MCU 即可。
接腳、功能要多一點就用 PIC18f4520 or 18F45J20,功能少一點的就用 PIC18F14J50/13J50。
發表於: 2009/9/14 10:26
|
|||
|
Re: 如何使用PIC16F913來USB程式
|
||||
---|---|---|---|---|
版主
|
底下找了些用 Software 做的 I2C 應用參考一下,在Microchip 美國網用輸入AN554 去搜尋一下:
Wired Communication - I2C PIC16 AN515 - Communicating with IIC Bus Using PIC16C5X Wired Communication - I2C N/A AN536 - Basic Serial EEPROM Operation Wired Communication - I2C PIC16 AN541 - Using PIC16C5x as a Smart IIC Peripheral Wired Communication - I2C PIC16 AN554 - Software Implementation of I²C Bus Master
發表於: 2009/9/11 10:20
|
|||
|
如何使用PIC16F913來USB程式
|
||||
---|---|---|---|---|
新會員
|
各位大大你好~
小弟使用PIC16F913來透過PDIUSBD11 USB晶片 與PC作溝通~已知PIC16F913是利用I/O來模擬 I2C介面~在撰寫程式方面有很大問題~希望各 位微處理器高手~能提供相關資訊或方法來協 助在下撰寫 ~在此感謝各位前輩閱讀
發表於: 2009/9/10 21:49
|
|||
|