:::
Browsing this Thread:
1 Anonymous Users
|
Re: 惠予協處dspic30f2020 ICD2 problem
|
||||
|---|---|---|---|---|
|
新會員
 
|
感謝回應，問題已順利解決。謝謝！
發表於: 2008/5/5 14:19
|
|||
|
||||
|
Re: 惠予協處dspic30f2020 ICD2 problem
|
||||
|---|---|---|---|---|
|
新會員
|
感謝版主，燒錄問題已解決。另請教一問題，是否dspic30f2020 IC運轉時，IC溫升很快，是否為正常？謝謝！因為用於EVM板時，IC的溫升也很高。
發表於: 2008/5/5 14:18
|
|||
|
||||
|
Re: 惠予協處dspic30f2020 ICD2 problem
|
||||
|---|---|---|---|---|
|
新會員
|
仿真器的五个引脚（一共六个，其中一个不用）电压不对，检查硬件后再尝试~~
發表於: 2008/4/30 17:28
|
|||
|
||||
|
Re: 惠予協處dspic30f2020 ICD2 problem
|
||||
|---|---|---|---|---|
|
版主
 
|
ICDWarn0020: Invalid target device id (expected=0x400, read=0x0)
出現此訊系代表 ICD2 無法讀到目標板上的 30F2020 ，很有可能是 ICD2 到版子上的接線有錯，建議用電錶量一下。
發表於: 2008/4/30 14:05
|
|||
|
||||
|
惠予協處dspic30f2020 ICD2 problem
|
||||
|---|---|---|---|---|
|
新會員
|
近來使用dspic30f2020的EVM板，覺得還不錯，使用上有達到自我預期的功能，但遇到一個問題。就是我想把有使用到的部分模組集結，並已洗出電路版，只是ICD2的燒錄功能會發生錯誤，錯誤訊息如下：
MPLAB ICD 2 Ready Connecting to MPLAB ICD 2 ...Connected Setting Vdd source to target ICDWarn0020: Invalid target device id (expected=0x400, read=0x0) ...Reading ICD Product ID Running ICD Self Test ...Passed MPLAB ICD 2 Ready Programming Target... ICDWarn0052: MPLAB ICD 2 cannot validate a target device. Please make sure that the target device is connected and properly powered. Select "OK" to continue, or "CANCEL" to abort the operation ICD0200: Operation Aborted (Warning 51). ICD0275: Programming failed.
發表於: 2008/4/30 9:36
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
