Re: dsPIC33fj外設函數庫使用出错
|
||||
---|---|---|---|---|
新會員
|
樓主能說清楚一點嗎? 我不太明白你怎麼解決, 我也有相同的問題哦.
發表於: 2009/4/10 5:21
|
|||
|
Re: dsPIC33fj外設函數庫使用出错
|
||||
---|---|---|---|---|
新會員
|
小弟刚接触pic单片机的,以前玩的是powerpc+linux还是区别挺大的
發表於: 2009/2/10 13:29
|
|||
|
dsPIC33fj外設函數庫使用出错
|
||||
---|---|---|---|---|
新會員
|
我用的芯片是dspic33fj256gp710,用了外设库,但是在全部编译的时候,出现连接错误
c:\program files\microchip\mplab c30\bin\bin\pic30-coff-ld.exe: Warning: target processor '33FJ256GP710' does not match linker script 然后我的代码中就回出现如下情况很多 test.c:193: undefined reference to `StartI2C' . . . 很奇怪,我在MPLAB项目树中的Library Files中已经加入了libp33FJ256GP710-coff.a的静态库,也成功了,从这里可以看出来 Executing: "C:\Program Files\Microchip\MPLAB C30\bin\pic30-gcc.exe" -mcpu=33FJ256GP710 "main.o" "memory.o" "gprs.o" "common.o" "gps.o" "communication_alow.o" "communication_uart.o" "delay.o" "mine_test.o" "C:\Program Files\Microchip\MPLAB C30\lib\dsPIC33F\libp33FJ256GP710-coff.a" -o"target\mine_qlm_gps.cof" -Wl,-L"C:\Program Files\Microchip\MPLAB C30\lib",--script="p33FJ256GP510.gld",--defsym=__MPLAB_BUILD=1,-Map="target\mine_qlm_gps.map",--report-mem 请教各位高手,应该如何解决
發表於: 2009/2/6 17:28
|
|||
|