Re: PIC24FJ256GA106 RAM使用問題
|
||||
---|---|---|---|---|
版主
|
參考底下的連結,那裏有 EEPROM 模擬的範例:
http://www.microchip.com/stellent/idc ... Id=1406&dDocName=en538000 或搜尋 CE209 也有的: CE209 - Run-Time Self Programming of FLASH Program Memory
發表於: 2009/7/30 15:16
|
|||
|
Re: PIC24FJ256GA106 RAM使用問題
|
||||
---|---|---|---|---|
中級會員
|
Dear Ryang:
問題已解決。謝謝!!! PIC24FJ256GA106的ROM有256K, 希望在200K之後存入一些相關設定資料,關機不會消失。 是否有相關資料可供參考。 謝謝
發表於: 2009/7/30 14:59
|
|||
|
PIC24FJ256GA106 RAM使用問題
|
||||
---|---|---|---|---|
中級會員
|
Dear All:
PIC24FJ256GA106的RAM為16384個位元組, 目前的RAM在使用6120Bytes為ok的 但要再使用多一些時就會產生Error訊息(6147 bytes以上) 訊息為: MN600_SUB.o: Link Error: Could not allocate section .nbss, size = 2 bytes, attributes = bss near Link Error: Could not allocate data memory 程式宣告方式如下: unsigned char Store_Area[138][27]; //Need more array unsigned char Ho_Lee_Trans_Data[9]; unsigned char ReciveData1[400]; unsigned char ReciveData2[400]; unsigned char ReciveData3[400]; unsigned char ReciveData4[400]; unsigned char N6000_Trans_Data[164]; unsigned char N6000_Trans_Data1[164]; unsigned char N6000_Trans_Data2[164]; unsigned char N6000_Trans_Data3[164]; unsigned char N6000_Test1_Function[5]; ....... 目前希望Store_Area[138][27]; 可使用多一些,最少2-3倍 ,是否有其它方式可使用。謝謝指教
發表於: 2009/7/30 14:22
|
|||
|