Re: C18 的fprint(...)
|
||||
---|---|---|---|---|
版主
|
C18 裡的 PRINTF( )函數是會使用 stdout,而它正指向 UART1 的輸出,也就是說當使用 PRINTF時也必須設定好 UART,這樣 PRINTF 才會正常的透過 RS-232 送出資料。
另外也可以使用 SPRINTF( ) 將資料存到 RAM 的 buffer 裡,這樣除錯起來也很方便。
發表於: 2006/6/5 15:05
|
|||
|
C18 的fprint(...)
|
||||
---|---|---|---|---|
新會員
|
各位前輩:
printf()是ANSI的標準函式庫的一個函式它的輸出是stdout 即monitor C18也有printf()它的輸出也是stdout compile之後的code 是燒錄到pic 有誰能告訴我它輸出到哪
發表於: 2006/6/2 21:37
|
|||
|