:::
Browsing this Thread:
1 Anonymous Users
|
Re: ICD2+APP006 無法燒 12F675 問題
|
||||
|---|---|---|---|---|
|
新會員
 
|
我拿舊程式來燒看看,就是不行.很奇怪!
發表於: 2006/9/7 15:12
|
|||
|
||||
|
Re: ICD2+APP006 無法燒 12F675 問題
|
||||
|---|---|---|---|---|
|
版主
 
|
1. 將MCLR重新設為External Mode
2. 用PICSTART Plus來燒 3. 也有可能你的程式現在有錯(雖然以前是對的)
發表於: 2006/9/7 15:05
|
|||
|
||||
|
Re: ICD2+APP006 無法燒 12F675 問題
|
||||
|---|---|---|---|---|
|
新會員
|
繼續燒下去顯示ok , 但功能不正常.(之前功能正常)
發表於: 2006/9/7 12:46
|
|||
|
||||
|
Re: ICD2+APP006 無法燒 12F675 問題
|
||||
|---|---|---|---|---|
|
版主
|
不要理會這個訊息，繼續燒下去就可以了。因為MCLR pin 之前已被擬設為 Input Pin 所以 燒錄會給你警告。如不放心改用PICSTART Plus 燒錄就好了。
發表於: 2006/9/7 10:04
|
|||
|
||||
|
ICD2+APP006 無法燒 12F675 問題
|
||||
|---|---|---|---|---|
|
新會員
|
吾用 ICD2+APP006 燒12F675 ,初期一切 OK ,日前卻出現問題,訊息如下:
MPLAB ICD 2 does not support programming this device if both the internal oscillator and internal MCLR are selected. You may continue programming, but you are encouraged 不知是甚麼問題 ? 謝謝! 另外請教, 有沒有較簡單燒寫的方法因為吾覺得ICD2+APP006 很麻煩,常常失連,須重新開啟 MPLAB.  
發表於: 2006/9/7 8:32
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
