:::
Browsing this Thread:
1 Anonymous Users
|
pagesel的指令該如何使用？？
|
||||
|---|---|---|---|---|
|
高級會員
 
|
想請問各位，pagesel的寫法如下可以指到正確的位址ㄇ
因為我在執行下面的程式時，無法得到我要的結果 例如我要將_TABLE_PARAMETER_A_LOOP的位址搬到pclath中，但是程式在執行起來，沒辦法如我預期中指_TABLE_PARAMETER_A_LOOP的位址上，請問這是什麼問題？ _TABLE_PARAMETER_A CLRF TABLE_INDEX MOVFF TEMPERATURE_INDEX,COUNT MOVLW .18 ADDWF TABLE_INDEX,F DECFSZ COUNT GOTO $-4 PAGESEL _TABLE_PARAMETER_B_LOOP1 MOVF TABLE_INDEX,W ADDWF PCL,F _TABLE_PARAMETER_A_LOOP1 ;0 MOVLW 78H MOVWF TEMP_A+4 MOVLW 0BEH MOVWF TEMP_A+3 MOVLW 0DH MOVWF TEMP_A+2 MOVLW 0EDH MOVWF TEMP_A+1 RETLW 28H ;1 MOVLW 78H MOVWF TEMP_A+4 MOVLW 0BEH MOVWF TEMP_A+3 MOVLW 0DH MOVWF TEMP_A+2 MOVLW 0EDH MOVWF TEMP_A+1 RETLW 28H ;2 MOVLW 78H MOVWF TEMP_A+4 MOVLW 0BEH MOVWF TEMP_A+3 MOVLW 0DH MOVWF TEMP_A+2 MOVLW 0EDH MOVWF TEMP_A+1 RETLW 28H ;3 MOVLW 78H MOVWF TEMP_A+4 MOVLW 0BEH MOVWF TEMP_A+3 MOVLW 0DH MOVWF TEMP_A+2 MOVLW 0EDH MOVWF TEMP_A+1 RETLW 28H ;4 MOVLW 78H MOVWF TEMP_A+4 MOVLW 0BEH MOVWF TEMP_A+3 MOVLW 0DH MOVWF TEMP_A+2 MOVLW 0EDH MOVWF TEMP_A+1 RETLW 28H ;5 MOVLW 78H MOVWF TEMP_A+4 MOVLW 0BEH MOVWF TEMP_A+3 MOVLW 0DH MOVWF TEMP_A+2 MOVLW 0EDH MOVWF TEMP_A+1 RETLW 28H ;6 MOVLW 78H MOVWF TEMP_A+4 MOVLW 0BEH MOVWF TEMP_A+3 MOVLW 0DH MOVWF TEMP_A+2 MOVLW 0EDH MOVWF TEMP_A+1 RETLW 28H
發表於: 2006/10/20 14:36
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
