Browsing this Thread:
1 Anonymous Users
|
Re: 請問有關MPLAB IDE燒錄時IC選擇錯誤而燒錄
|
|
版主
Joined
: 2004/4/30 10:53 最後登入時間
: 2021/11/30 18:11
From CAE, Microchip
Group:
站務管理者 註冊會員
Level : 75 HP : 744 / 1861 MP : 5367 / 108956 EXP : 45
|
1. 先確定一下 PIC12C508A 與 PIC12F508 的程式碼一樣,但燒錄的方式也事使用 ICSP 的方式燒錄。但 12C508A 是 OTP 版本線已經較少客戶使用,如果可以的話是否可以改用 PIC12F508 的 Flash 元件。
2. 程式沒有跑掉,也沒有什麼問題。
發表於: 2008/1/28 11:37
|
|
|
請問有關MPLAB IDE燒錄時IC選擇錯誤而燒錄
|
|
新會員
Joined
: 2006/6/30 23:07 最後登入時間
: 2008/1/26 23:10
Group:
註冊會員
Level : 1 HP : 0 / 0 MP : 0 / 0 EXP : 0
|
今天我在公司上班時叫錯IC 在Select Device的地方選擇錯誤 但是燒碼程式無誤 正確IC應該是PIC12C508A 而我一時疏忽較成PIC12F508 但是程式一樣有辦法燒錄 CheckSum、ID Memory、Configuration Bits這三個我都確認過了 跟公司的注意事項一模一樣 重點只是在Select Device操作錯誤 但燒錄一切正常 IC也焊到版子上測試OK 請問這樣的話 會不會讓IC出了什麼問題 或者是程式跑掉之類的
發表於: 2008/1/26 23:16
|
|
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.