:::
Browsing this Thread:
1 Anonymous Users
|
錯誤代碼判別
|
||||
|---|---|---|---|---|
|
新會員
 
|
請問各位高手
ICDWarn0046: Because clock switching is enabled, ICD2 requires the user to cycle target power after a program operation. Informational only. Click "OK" to continue and perform indicated power cycling. 以上錯誤代碼代表什麼意思呢?我是用programming mode，當我燒錄完畢時，MCLR仍然pull low時，程式就開始動作了! 這是那裡設定出了問題呢?因為我是run 範例程式，所以我不知道要去那裡更改設定! 麻煩知道的人跟我說一聲吧! 謝謝了! 另外，我有時後燒錄時也會出現以下錯誤代碼! MPLAB ICD 2 Ready Programming Target... ICDWarn0052: MPLAB ICD 2 cannot validate a target device. Please make sure that the target device is connected and properly powered. Select "OK" to continue, or "CANCEL" to abort the operation ...Validating configuration fields ...Erasing Part ...Programming Programming Executive ...Verifying Programming Executive ICD0161: Verify failed (MemType = Test, Address = 0x800000, Expected Val = 0x40080, Val Read = 0x0) ICD0275: Programming failed. MPLAB ICD 2 Ready 這又是為什麼呢?
發表於: 2009/6/17 11:02
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
