:::
Browsing this Thread:
2 Anonymous Users
|
Re: 有關ICD2燒錄PIC16F886的問題
|
||||
|---|---|---|---|---|
|
版主
 
|
PIC16F886 燒錄時要給電。
MCLR pin 不要並電容，只要用10K pull high
發表於: 2007/4/27 11:56
|
|||
|
||||
|
Re: 有關ICD2燒錄PIC16F886的問題
|
||||
|---|---|---|---|---|
|
新會員
 
|
沒錯，我用的是MPLAB IDE V7.52
ICSP也確認沒問題，因為之前燒688跟877都沒問題 至於Target Board 供電是指??
發表於: 2007/4/26 13:55
|
|||
|
||||
|
Re: 有關ICD2燒錄PIC16F886的問題
|
||||
|---|---|---|---|---|
|
版主
|
1. PIC16F886 請用MPLAB IDE v7.52 的版本
2. 以上訊息 ICD2 耕本就找不到 PIC16F886 的 IC ，請確定 ICD2 與 PIC16F886 ICSP 的連線是否有錯，還有 Target Board 必須要給電。
發表於: 2007/4/26 13:18
|
|||
|
||||
|
有關ICD2燒錄PIC16F886的問題
|
||||
|---|---|---|---|---|
|
新會員
|
我是一個新手..
請問一下我用PIC16F886的IC.. 我在使用ICD2燒錄886的時候出現以下訊息： ICDWarn0020: Invalid target device id (expected=0x103, read=0x0) ...Reading ICD Product ID Running ICD Self Test ...Passed MPLAB ICD 2 Ready Programming Target... ICDWarn0052: MPLAB ICD 2 cannot validate a target device. Please make sure that the target device is connected and properly powered. Select "OK" to continue, or "CANCEL" to abort the operation ...Validating configuration fields ...Erasing Part ...Programming Program Memory (0x0 - 0x7FF) Verifying... ICDWarn0052: MPLAB ICD 2 cannot validate a target device. Please make sure that the target device is connected and properly powered. Select "OK" to continue, or "CANCEL" to abort the operation ...Program Memory ICD0161: Verify failed (MemType = Program, Address = 0x1, Expected Val = 0x3000, Val Read = 0x0) ICD0275: Programming failed. MPLAB ICD 2 Ready 請問一下，是不是我哪裡設錯了或是沒設到，還是程式上的問題...請大大幫我解答，謝謝!!
發表於: 2007/4/26 11:37
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
