Re: 關於dsPIC33FJ12MC202 燒錄
|
||||
---|---|---|---|---|
初級會員
|
我檢查過後都有給電源(3.3V)
在Vdd(第十三之接腳)及AVdd(28支) 在(8 19 及 27)接地 接ICD2部分 依序為(Vdd(5V) MCLR(1) PGD1(4) PGC1(5) Vss) IC 及 ICD2 都有共地 使用軟體版本是 V7.62 及 MPLAB_C30_v3_01-StudentEdition Setting Vdd source to target ICDWarn0020: Invalid target device id (expected=0x801, read=0x0) ...Reading ICD Product ID Running ICD Self Test ...Passed MPLAB ICD 2 Ready 但仍然有出現偵測不到IC的狀態 請問各位前輩 有沒有地方是我忽略的 謝謝
發表於: 2007/9/19 10:53
|
|||
|
Re: 關於dsPIC33FJ12MC202 燒錄
|
||||
---|---|---|---|---|
版主
|
參照:
ICDWarn0020: Invalid target device id (expected=0x801, read=0x0) ICD2 讀不到 ID 碼,請檢查ICD2 的連線及PIC的所以店圓角是否有接到,PIC 是否有給電。 這個網站有許多以前討論過的問題,只要輸入要查詢的字元就可以找到許多資料: 在左邊"討論區"裡,找一下。
發表於: 2007/9/17 11:37
|
|||
|
Re: 關於dsPIC33FJ12MC202 燒錄
|
||||
---|---|---|---|---|
初級會員
|
我是使用MPLAB IDE v7.62
及 MPLAB_C30_v3_01-StudentEdition
發表於: 2007/9/17 11:00
|
|||
|
Re: 關於dsPIC33FJ12MC202 燒錄
|
||||
---|---|---|---|---|
初級會員
|
Setting Vdd source to target
ICDWarn0020: Invalid target device id (expected=0x801, read=0x0) ...Reading ICD Product ID Running ICD Self Test ...Passed MPLAB ICD 2 Ready Programming Target... ICDWarn0052: MPLAB ICD 2 cannot validate a target device. Please make sure that the target device is connected and properly powered. Select "OK" to continue, or "CANCEL" to abort the operation ICD0200: Operation Aborted (Warning 51). ICD0275: Programming failed. MPLAB ICD 2 Ready 這些是它顯示的錯誤訊息 可是我電源都有接上 我是使用PGD1及PGC1作為燒錄的接腳
發表於: 2007/9/17 10:57
|
|||
|
Re: 關於dsPIC33FJ12MC202 燒錄
|
||||
---|---|---|---|---|
高級會員
|
因為那顆是比較新的IC
所以MPLAB IDE和C30都要最新版的 去下載吧!
發表於: 2007/9/17 10:56
|
|||
|
Re: 關於dsPIC33FJ12MC202 燒錄
|
||||
---|---|---|---|---|
版主
|
請問是否有讀到 Device ID? 還是燒錄時發生錯誤?
請把 Error Message 貼出來看一下。
發表於: 2007/9/17 10:07
|
|||
|
關於dsPIC33FJ12MC202 燒錄
|
||||
---|---|---|---|---|
初級會員
|
我燒錄時dsPIC接3.3V
ICD2 是接到 PGD1及PGC1 在configure裡的comm channel 也選擇了PGD1及PGC1 但還是不能燒錄 請問各位前輩不知我還有沒有其他沒有設定好的地方 謝謝
發表於: 2007/9/13 16:24
|
|||
|