Re: PWM setting using Harmony 3 configurator
|
||||
---|---|---|---|---|
管理員
|
MCU:ATSAME51G18A
1.output matrix選擇,參考如附圖 Default Channel Output=0x00,模式選擇以此類推 附圖表示輸出的訊號位置。 2.Channel Configuration TCC0、TCC1:wo[0]~wo[7] 在PWM模式下 wo[0]與wo[4]是互補狀態 wo[1]與wo[5]是互補狀態 wo[2]與wo[6]是互補狀態 wo[3]與wo[7]是互補狀態 3.輸出腳位將呈現High或者Low 4.Output 將Invert Output啟用,輸出波型將得到反向 假設原本送出10%的Duty cycle 獎反向變成90%的Duty Cycle 5.Dead time,參考如附圖 波型在輸出High->Low或者Low->High,將會延時上升
發表於: 2021/3/26 9:48
Edited by Darren on 2021年03月26日 10:04:24
Edited by Darren on 2021年03月26日 10:04:44 Edited by Darren on 2021年03月26日 10:05:51 Edited by Darren on 2021年03月26日 10:06:05 Edited by Libra on 2021年03月26日 10:07:01 Edited by Libra on 2021年03月26日 10:07:19 Edited by Libra on 2021年03月26日 10:07:39 Edited by Libra on 2021年03月26日 10:08:20 Edited by Libra on 2021年03月26日 10:08:31 |
|||
|