:::
Browsing this Thread:
1 Anonymous Users
|
dsPIC33GJ256MC710 debug所出現錯誤訊息
|
||||
|---|---|---|---|---|
|
新會員
 
|
您好
我目前使用Mplab 8.10版本編譯，ICD可連結進入debug模式 linker(.gld) OK Header(.h) OK 成功訊息如下： ---------------------------------------------- Connecting to MPLAB ICD 2 ...Connected Setting Vdd source to target Target Device dsPIC33FJ256MC710 found, revision = Rev 0x3002 ...Reading ICD Product ID Running ICD Self Test ...Passed MPLAB ICD 2 Ready ----------------------------------------------- 編譯後進入載入程式階段，出現錯誤訊息如下： ------------------------------------------------ Programming Target... ICDWarn0052: MPLAB ICD 2 cannot validate a target device. Please make sure that the target device is connected and properly powered. Select "OK" to continue, or "CANCEL" to abort the operation ICD0200: Operation Aborted (Warning 51). ICD0275: Programming failed. MPLAB ICD 2 Ready ------------------------------------------------- 爬文之後，為了使用本身32K RAM，設定方法如下 設定方面，Project -> build options -> Project -> MPLAB C30 -> categories -Memory model -> data Model - large data model 若我將data model 設定為預設(default) 出現錯誤訊息如下： ----------------------------------- Programming Target... ...Validating configuration fields ICDWarn0046: Because clock switching is enabled, MPLAB ICD 2 requires the user to cycle target power after a program operation. (<--這一段訊息有影響嗎??) ...Erasing Part ...Programming Programming Executive ...Verifying Programming Executive ICD0161: Verify failed (MemType = Test, Address = 0x800018, Expected Val = 0x80011C, Val Read = 0x0) ICD0275: Programming failed. MPLAB ICD 2 Ready ------------------------------------- 謝謝
發表於: 2008/12/4 11:56
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
