:::
Browsing this Thread:
1 Anonymous Users
|
Re: 求救:發生ICD0083錯誤訊息 檢查結果 如下:
|
||||
|---|---|---|---|---|
|
初級會員
 
|
HO! God!
謝謝你的回覆,我已經跟Grant緊急下order了.
發表於: 2005/4/14 14:29
|
|||
|
||||
|
Re: 求救:發生ICD0083錯誤訊息 檢查結果 如下:
|
||||
|---|---|---|---|---|
|
版主
 
|
PIC16F684 是不能直接用 ICD2 來除錯的，它還需要一個專用轉接座 AC162055，該轉接座上有一顆 16F684 除錯專用 IC。
但 ICD2 可以用來直接燒錄 16F684。 關於此資訊可以參考 2005 Product Select Guide (Page 63) http://ww1.microchip.com/downloads/en/DeviceDoc/00148K2.pdf
發表於: 2005/4/14 14:13
|
|||
|
||||
|
求救:發生ICD0083錯誤訊息 檢查結果 如下:
|
||||
|---|---|---|---|---|
|
初級會員
|
求救:發生ICD0083錯誤訊息 檢查結果 如下:
使用:PIC16F684 內部RC 以下是依照ICD0083錯誤訊息 檢查結果 : ICD0083: 1.Target processor has not been programmed with a debug executive (i.e., MPLAB ICD 2 was selected as a programmer, not a debugger.) 檢查結果 :設定在Debug模式 2.Target application is not powered. 檢查結果 :有電源+5vdc 3.Target application does not have an oscillator. 檢查結果 : Configuration bit setting:Interner RC NO CLOCK 4. The BOD bit is enabled during low voltage usage. 檢查結果 :Configuration bit setting :BOD and SBOREN disable 5.Configuration bit setting for oscillator (Configure>Configuration Bits) are incorrect for target oscillator. 檢查結果 :OSC使用Interner RC NO CLOCK Watchdog timer:OFF Power UP timer: OFF Master clear enable: External Code potecte:OFF Data EE read protect:OFF Brown out detector:BOD and SBOREN disable Internal External switch over mode:Disable Monitor clock fail-safe:Disable PS:我有檢查ICD2到IC的接腳是正確的,但是MCLR準位一直是LOW,若將ICD2拔除MCLR又回復到HIGH. 謝謝 !
發表於: 2005/4/14 12:54
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
