Re: APP009連線問題
|
||||
---|---|---|---|---|
版主
|
IC 壞了? 寄一 dsPIC30F4011 給你換換看,發個傳真到 Microchip 給我吧!
發表於: 2005/4/20 20:58
|
|||
|
Re: APP009連線問題
|
||||
---|---|---|---|---|
版主
|
Error message :
Connecting to MPLAB ICD 2 ...Connected Setting Vdd source to target <------ Target board 要自己給電,不要從 ICD2 給,看起來你的問題是將 ICD2 到 Target board 的電關掉,App009 自己給電。 http://www.microchip.com.tw/modules/n ... .php?topic_id=348&forum=1 http://www.microchip.com.tw/modules/n ... .php?topic_id=731&forum=1 http://www.microchip.com.tw/modules/n ... .php?topic_id=470&forum=1
發表於: 2005/4/20 14:40
|
|||
|
APP009連線問題
|
||||
---|---|---|---|---|
新會員
|
我將dsPIC_AdvProg\EX1程式在Build下是成功的
但是ICD 2在連線時卻出現(Debugger模式) Connecting to MPLAB ICD 2 ...Connected Setting Vdd source to target ICDWarn0020: Invalid target device id (expected=0x5, read=0x0) ...Reading ICD Product ID Running ICD Self Test ...Passed MPLAB ICD 2 Ready 之後程式燒錄變是失敗的結果 Programming Target... ...Erasing Part ...Programming Program Memory (0x0 - 0x4BF) ICD0152: Failed to read all of requested bytes (0x0 of 0x8) ICD0151: Failed to sync memory (MT = Program) (Dir = 0x1) Connecting to MPLAB ICD 2 ...Connected Setting Vdd source to target ICDWarn0020: Invalid target device id (expected=0x5, read=0x0) ...Reading ICD Product ID Running ICD Self Test ...Passed ICD0275: Programming failed. MPLAB ICD 2 Ready 煩請高手相助...謝謝.......
發表於: 2005/4/20 11:05
|
|||
|