:::
Browsing this Thread:
1 Anonymous Users
|
Re: 我的BANK怎麼了?
|
||||
|---|---|---|---|---|
|
新會員
 
|
不好意思!!
我已經在之前的討論內容早找到解答....如下 Re: 16F628 與 16F628A MPASM 的提示有三種 : 1. Error : 程式有嚴重的錯誤導致 MPASM 無法翻譯，這時一定要找出錯誤出來 2. Warning : 程式被檢測出重要的錯誤，可能導致程式執行上的錯誤，最好將錯誤找出來修正 3. Message : 只是訊息的通知，確定你已經按規定設定了即可。
發表於: 2005/8/24 0:16
|
|||
|
||||
|
我的BANK怎麼了?
|
||||
|---|---|---|---|---|
|
新會員
|
各位先進們討教了: 以下是我程式我再編譯後出現這樣的一段訊息: "Message[302] D:\PIC PROGRAM\L-RMOVE.ASM 11 : Register in operand not in bank 0. Ensure that bank bits are correct. " 但是我的BANK並沒有切錯啊 !!傷腦筋!!  ; 2005 08/05 LED 左右移 測試ok LIST P=16C622 include "P16C622.inc" COUNTER EQU 20H ORG 0X00 MAIN CLRF PORTB BSF STATUS,RP0 ;置第1檔頁 CLRF TRISB ;設PORTB 為輸出 BCF STATUS,RP0 ;置第0檔頁 MOVLW b'00000111' MOVWF CMCON ; 設porta為數位輸入 BSF PORTB,0 ;輸出第0位元"1" BCF STATUS,C ;設定轉入為"0" ;========================================= initial CALL scan LL2 CALL DELAY RLF PORTB,F DECFSZ COUNTER ,F GOTO LL2 CALL scan RRR CALL DELAY RRF PORTB,F DECFSZ COUNTER,F GOTO RRR GOTO initial ;=============================== scan MOVLW 03H MOVWF COUNTER RETURN ;=============================== DELAY MOVLW 0xFF MOVWF 22H CLRF 23H DEL2 DECFSZ 23H,F GOTO DEL2 DECFSZ 22H,F GOTO DEL2 RETURN END
發表於: 2005/8/23 23:57
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
