Re: 請教APP001練習板 燒錄的問題
|
||||
---|---|---|---|---|
初級會員
|
感謝板主的回覆
我換了一顆CHIP燒錄就OK了! 謝謝
發表於: 2006/3/20 9:22
|
|||
|
Re: 請教APP001練習板 燒錄的問題
|
||||
---|---|---|---|---|
版主
|
需要回公司測看看,明天再給你答案。
發表於: 2006/3/16 17:36
|
|||
|
請教APP001練習板 燒錄的問題
|
||||
---|---|---|---|---|
初級會員
|
想請問一下 我用ICD2+APP001模擬板的燒錄區來作燒錄PIC12F509的動作, jumper都調好, 也給ICD2 9V電源, MPLAB的Select Device也選定PIC12F509,但在燒錄時會出現以下訊息:
ICDWarn0052: MPLAB ICD 2 cannot validate a target device. Please make sure that the target device is connected and properly powered. Select "OK" to continue, or "CANCEL" to abort the operation ...Program Memory ...User ID Memory ...Verify Succeeded Programming Configuration Bits ICDWarn0052: MPLAB ICD 2 cannot validate a target device. Please make sure that the target device is connected and properly powered. Select "OK" to continue, or "CANCEL" to abort the operation .. Config Memory Verifying configuration memory... ...Verify Succeeded ...Programming succeeded 出現警告訊息,但最後還是顯示成功,但把chip拿去板子跑時卻不會動,想請問前輩,是否是燒錄失敗或是程式本身問題呢? 謝謝
發表於: 2006/3/16 11:00
|
|||
|