Dear AdamSyu :

1. Timer0 :
void TMR0_ISR(void)
{
// clear the TMR0 interrupt flag
PIR0bits.TMR0IF = 0;
if(TMR0_InterruptHandler)
{
TMR0_InterruptHandler();
}

// add your TMR0 interrupt custom code
D2_LED_Toggle();
}
//-----------------------------------------------
2.Timer1 :
void main(void)
{
// initialize the device
SYSTEM_Initialize();

TMR1_SetInterruptHandler (myTimerISR); //Define interrupt Handler

// When using interrupts, you need to set the Global and Peripheral Interrupt Enable bits
// Use the following macros to:

// Enable the Global Interrupts
INTERRUPT_GlobalInterruptEnable();

// Enable the Peripheral Interrupts
INTERRUPT_PeripheralInterruptEnable();

// Disable the Global Interrupts
//INTERRUPT_GlobalInterruptDisable();

// Disable the Peripheral Interrupts
//INTERRUPT_PeripheralInterruptDisable();

while (1)
{
// Add your application code
}

}
void myTimerISR(void){
D2_LED_Toggle();


}
/**
End of File
*/
//*****************************************************
就以上兩種...
謝謝.

有點抓不到頭緒, 可以請您多描述下您的問題嗎?

Dear All :

1. code在Timer0中.
2.code在Timer1外.

用哪個寫比較好?
謝謝.