Browsing this Thread:
1 Anonymous Users
|
SW_UART 在APP001實驗板的疑問
|
|
新會員
Joined
: 2006/9/15 11:34 最後登入時間
: 2006/10/18 14:51
Group:
註冊會員
Level : 1 HP : 0 / 0 MP : 0 / 0 EXP : 0
|
請問使用APP001,PIC型號18F452 在使用SW_UART是否可以正常工作? 由於目前我自己測試的結果,(portb 4[TX] )完全沒有訊號,所以想請問有那些地方我沒有注意到? 以下是程式碼::
#include <p18f452.h> #include <p18cxxx.h> #include <sw_uart.h>
#define Nop() {_asm nop _endasm} int i; void DelayRXHalfBitUART(void) { for(i=0;i<58;i++) Nop();} void DelayRXBitUART(void) { for(i=0;i<26;i++) Nop();} void DelayTXBitUART(void) { for(i=0;i<56;i++) Nop();}
void main( void ) { char data2='a'; // configure software UART OpenUART(); while( 1 ) { WriteUART(data2); } }
以下是我使用的Delay延遲的設定公式以及數值 /* osc = 16M Hz ; Baud = 57600 DelayTXBitUART Delay for: ((((2*FOSC) / (4*baud)) + 1) / 2) - 12 cycles ==>((((2*16M)/(4*57600))+1)/2)-12 = 58 DelayRXHalfBitUART Delay for: ((((2*FOSC) / (8*baud)) + 1) / 2) - 9 cycles ==>((((2*16M)/(8*57600))+1)/2)-9 = 26 DelayRXBitUART Delay for: ((((2*FOSC) / (4*baud)) + 1) / 2) - 14 cycles ==>((((2*16M)/(4*57600))+1)/2)-14 = 56 */
發表於: 2006/9/22 12:09
|
|
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.