:::
Browsing this Thread:
1 Anonymous Users
|
Re: 如何保護ICD2不被燒掉？？
|
||||
|---|---|---|---|---|
|
新會員
 
|
還是沒用！！ICD2的問題真多！！
發表於: 2004/11/17 8:32
|
|||
|
||||
|
Re: 如何保護ICD2不被燒掉？？
|
||||
|---|---|---|---|---|
|
資深會員
|
programmer先選到none
然後再選到ICD2讓他重抓一次試試 有時我拔掉再插入後也有這情形 重新抓就好了 不要用重新連結那選項 有時用那個無效
發表於: 2004/11/16 18:04
|
|||
|
||||
|
Re: 如何保護ICD2不被燒掉？？
|
||||
|---|---|---|---|---|
|
新會員
|
為什麼我執行Program target device一次之後，把線拔起來測試過後，把線再插回去ICD2連線卻出現下面的錯誤：
ICDWarn0020: Invalid target device id (expected=ExpectedID, read=ReadID) (OK) MPLAB ICD 2 has read the device ID of the target device and found it different than expected for the device type selected within MPLAB IDE. If ReadID is 0 then it is likely that the target device is not powered, not connected, or simply missing. In any case, this is just a warning that MPLAB ICD 2 has not found the expected target device. Click OK to proceed. 執行(Program target device)卻出現下面的錯誤： Programming Target... ...Erasing Part ...Programming Program Memory (0x0 - 0x234) Verifying... ...Program Memory ICD0161: Verify failed (MemType = Program, Address = 0x0, Expected Val = 0x3000, Val Read = 0x0) ICD0275: Programming failed. MPLAB ICD 2 Ready 而且連續二台ICD2都是這樣子的情形，該如何是好呢？ 
發表於: 2004/11/16 14:42
|
|||
|
||||
|
如何保護ICD2不被燒掉？？
|
||||
|---|---|---|---|---|
|
新會員
|
請問要如何保護ICD2不會燒掉？？
發表於: 2004/11/16 14:21
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
