初級會員
Joined
: 2006/2/15 10:06 最後登入時間
: 2008/1/21 19:44
Group:
註冊會員
Level : 3 HP : 0 / 68 MP : 8 / 3711 EXP : 73
|
版主你好:
Toolsuite Contents: 選擇 MPLAB C18 C Compiler(mcc18.exe) 但是build all 會有問題 我不了解哪裡有問題?? 感謝版主的慈悲!!
程式:
********************************************* /********************************************************************* * * Microchip USB Bootloader Version 1.2 * ********************************************************************* * FileName: main.c * Dependencies: See INCLUDES section below * Processor: PIC18 * Compiler: C18 3.11+ * Company: Microchip Technology, Inc. * * Software License Agreement * * The software supplied herewith by Microchip Technology Incorporated * (the ompany? for its PICmicro?Microcontroller is intended and * supplied to you, the Company customer, for use solely and * exclusively on Microchip PICmicro Microcontroller products. The * software is owned by the Company and/or its supplier, and is * protected under applicable copyright laws. All rights are reserved. * Any use in violation of the foregoing restrictions may subject the * user to criminal sanctions under applicable laws, as well as to * civil liability for the breach of the terms and conditions of this * license. * * THIS SOFTWARE IS PROVIDED IN AN S IS?CONDITION. NO WARRANTIES, * WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED * TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A * PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. THE COMPANY SHALL NOT, * IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL OR * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. * * Author Date Comment *~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * Rawin Rojvanit 11/19/04 Original. * Rawin Rojvanit 05/14/07 Minor updates. ********************************************************************/
/********************************************************************* IMPORTANT NOTE: This booloader example code is not intended to work with the PIC18F87J50 Family of microcontrollers. *********************************************************************/
/** I N C L U D E S **********************************************************/ #include "C:\MCC18\h\P18F4550.h" #include "C:\MCHPFSUSB\ttt\Boot\system\typedefs.h" // Required #include "C:\MCHPFSUSB\ttt\Boot\system\usb\usb.h" // Required #include "C:\MCHPFSUSB\ttt\Boot\io_cfg.h" // Required
#include "C:\MCHPFSUSB\ttt\Boot\system\usb\usb_compile_time_validation.h" // Optional
/** C O N F I G U R A T I O N ************************************************/
#if defined(__18F4550)||defined(__18F4455)|| \ defined(__18F2550)||defined(__18F2455)|| \ defined(__18F4553)||defined(__18F4458)|| \ defined(__18F2553)||defined(__18F2458)
// Note: Some of the below configuration bits are commented out // to prevent build errors with some of the above listed devices. // For example, on the PIC18F4458 CP3, WRT3, and EBTR3 don't exist.
#pragma config PLLDIV = 5 // (20 MHz input) #pragma config CPUDIV = OSC1_PLL2 #pragma config USBDIV = 2 // Clock source from 96MHz PLL/2 #pragma config FOSC = HSPLL_HS #pragma config FCMEN = OFF #pragma config IESO = OFF #pragma config PWRT = OFF #pragma config BOR = ON #pragma config BORV = 3 #pragma config VREGEN = ON #pragma config WDT = OFF #pragma config WDTPS = 32768 #pragma config MCLRE = ON #pragma config LPT1OSC = OFF #pragma config PBADEN = OFF #pragma config CCP2MX = ON #pragma config STVREN = ON #pragma config LVP = OFF //#pragma config ICPRT = OFF // Dedicated In-Circuit Debug/Programming #pragma config XINST = OFF // Extended Instruction Set #pragma config CP0 = OFF #pragma config CP1 = OFF #pragma config CP2 = OFF //#pragma config CP3 = OFF #pragma config CPB = OFF #pragma config CPD = OFF #pragma config WRT0 = OFF #pragma config WRT1 = OFF #pragma config WRT2 = OFF //#pragma config WRT3 = OFF #pragma config WRTB = ON // Boot Block Write Protection #pragma config WRTC = OFF #pragma config WRTD = OFF #pragma config EBTR0 = OFF #pragma config EBTR1 = OFF #pragma config EBTR2 = OFF //#pragma config EBTR3 = OFF #pragma config EBTRB = OFF
#endif
/** V A R I A B L E S ********************************************************/ #pragma udata
/** P R I V A T E P R O T O T Y P E S ***************************************/
/** V E C T O R R E M A P P I N G *******************************************/
#pragma code _HIGH_INTERRUPT_VECTOR = 0x000008 void _high_ISR (void) { _asm goto RM_HIGH_INTERRUPT_VECTOR _endasm }
#pragma code _LOW_INTERRUPT_VECTOR = 0x000018 void _low_ISR (void) { _asm goto RM_LOW_INTERRUPT_VECTOR _endasm }
#pragma code
/** D E C L A R A T I O N S **************************************************/ #pragma code /****************************************************************************** * Function: void main(void) * * PreCondition: None * * Input: None * * Output: None * * Side Effects: None * * Overview: Main program entry point. * * Note: None *****************************************************************************/ void main(void) { byte temp; temp = ADCON1; ADCON1 |= 0x0F; //TRISBbits.TRISB4 = 1; // Reset value is already '1' //Check Bootload Mode Entry Condition if(PORTBbits.RB4 == 1) // If not pressed, User Mode { ADCON1 = temp; // Restore reset value _asm goto RM_RESET_VECTOR _endasm }//end if //Bootload Mode mInitAllLEDs(); mInitializeUSBDriver(); // See usbdrv.h USBCheckBusStatus(); // Modified to always enable USB module while(1) { USBDriverService(); // See usbdrv.c BootService(); // See boot.c }//end while }//end main
#pragma code user = RM_RESET_VECTOR
/** EOF main.c ***************************************************************/
*********************************************
錯誤訊息如下
---------------------------------------------------------------------- Release build of project `C:\MCHPFSUSB\ttt\Hid\Ctrl_IO_AD_DEMO\MCHPUSB.mcp' started. Wed Jan 16 15:11:54 2008 ---------------------------------------------------------------------- Clean: Deleting intermediary and output files. Clean: Deleted file "C:\MCHPFSUSB\ttt\Hid\Ctrl_IO_AD_DEMO\main.o". Clean: Done. Executing: "c:\mcc18\bin\mcc18.exe" -p=18F4550 "C:\MCHPFSUSB\ttt\Boot\main.c" -fo="main.o" -Ou- -Ot- -Ob- -Op- -Or- -Od- -Opa- MPLAB C18 v3.15 (demo) Copyright 1999-2005 Microchip Technology Inc. Days remaining until demo becomes feature limited: 60 Skipping link step. The project contains no linker script. ---------------------------------------------------------------------- Release build of project `C:\MCHPFSUSB\ttt\Hid\Ctrl_IO_AD_DEMO\MCHPUSB.mcp' failed. Wed Jan 16 15:11:54 2008 FAILED ----------------------------------------------------------------------
發表於: 2008/1/16 15:25
|