Browsing this Thread:
1 Anonymous Users
|
Re: PIC18F4550 如何透過USB將檔案傳輸至4550中的EEPROM
|
|
中級會員
Joined
: 2007/9/20 13:35 最後登入時間
: 2008/6/27 9:38
From Taipei
Group:
註冊會員
Level : 5 HP : 0 / 114 MP : 15 / 5724 EXP : 59
|
Hi, 您好:
你要不要運用以下的EE Read/Write modules 加入你的user.c程式中, 然後透過buffer將EEPROM的data讀寫入PIC中.
void EE_Write (unsigned char, unsigned char); unsigned char EE_Read (unsigned char); . . . void EE_Write (unsigned char EE_Address, unsigned char EE_Data) { PIR2bits.EEIF = 0; EEADR = EE_Address; EEDATA = EE_Data; EECON1bits.EEPGD = 0; EECON1bits.CFGS = 0; EECON1bits.WREN = 1; INTCONbits.GIE = 0; //disable all interrupts _asm MOVLW 0X55 //refer to page.86 of 18f4550 doc, cause it must be follow writen sequence.. MOVWF EECON2,0 MOVLW 0XAA MOVWF EECON2,0 BSF EECON1,1,0 //Set WR bit to begin write , refer page.93 _endasm INTCONbits.GIE = 1; //enable all interrupts while (!PIR2bits.EEIF); //waiting for eeprom write action all done! PIR2bits.EEIF = 0; //if done then clear EEIF flag , it means initial EECON1bits.WREN = 0; //disable eeprom write cycle.. }
unsigned char EE_Read (unsigned char EE_Address) { EEADR = EE_Address; EECON1bits.EEPGD = 0; EECON1bits.CFGS = 0; EECON1bits.RD = 1; return EEDATA; }
發表於: 2008/4/23 18:13
|
|
|
PIC18F4550 如何透過USB將檔案傳輸至4550中的EEPROM
|
|
新會員
Joined
: 2008/3/9 13:57 最後登入時間
: 2008/3/9 13:57
Group:
註冊會員
Level : 1 HP : 0 / 0 MP : 0 / 0 EXP : 0
|
小弟我是剛接觸PIC的新手,用BCB寫視窗介面,TRY了幾天後,有透過USB將LED顯示亮滅,但我想請問的是, 要如何做才能將檔案傳輸至CHIP內的EEPROM,之後再將檔案牘回來。
我在MCHPFSUSB\fw\Demo\user\user.h 增加了 READ_EEDATA = 0x04 WRITE_EEDATA = 0x05 並在MCHPFSUSB\fw\Demo\user\user.c 增加了 case WRITE_EEDATA : WriteEE(); //已經將WriteEE();寫在檔案前面了
但是在我的BCB界面上該怎麼做才能達成我要的功能呢? 或是我在過程中的想法與做法有錯誤,還請各位給我點意見,謝謝
發表於: 2008/3/9 14:10
|
|
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.