請問: 當PIC24FJ128GA106的UART設定為N82時 與電腦(UART設為N81)無法通訊 這在"PIC24FJ256GA110 Family Rev. A3 Silicon Errata"中有提到 4 Module: UART When the UART is operating using two Stop bits (STSEL = 1), it may sample the first Stop bit instead of the second one. If the device being communicated with is one using one Stop bit in its communications, this may lead to framing errors.
Work around None.
Date Codes that pertain to this issue: All engineering and production devices.