Re: LF 125Khz OOK waveform generation for ATSAME51G18A
|
||||
---|---|---|---|---|
版主
|
Microchip 以前有做 RFID (microID) 現在已經不再提供,現只有存在網站上的依些參考資料如下:
Microchip 125 kHz RFID System Design Guide: http://ww1.microchip.com/downloads/en/devicedoc/51115f.pdf AN710 Antenna Circuit Design for RFID Applications: http://ww1.microchip.com/downloads/en/appnotes/00710c.pdf Microchip RFID 13.56 MHz RFID System Design Guide: http://ww1.microchip.com/downloads/en/devicedoc/21299D.pdf
發表於: 2020/6/16 13:11
|
|||
|
Re: LF 125Khz OOK waveform generation for ATSAME51G18A
|
||||
---|---|---|---|---|
管理員
|
SAMD5x/E5x 系列沒有既成的 DMS(Data Signal Modulator) function.
如果搭配 CCL (Configurable Custom Logic) 則可以產生Waveform的Module TC 與 TCC, 可以當成Input來達到調變的效果 目前CCL的範例可以在Harmony v3下找到SAME54-EK做的曼徹斯特編碼器範例 \HarmonyFramework\csp\apps\ccl\manchester_encoder Attach file: (0.00 KB) (0.00 KB) (0.00 KB) (0.00 KB)
發表於: 2020/6/16 13:38
|
|||
|
Re: LF 125Khz OOK waveform generation for ATSAME51G18A
|
||||
---|---|---|---|---|
初級會員
|
hi,
1. CCL產生125khz carrier.有無範例參考? 2. 調變信號可由SPI or UART 以byte 的方式傳送? 3.底下這個範例要怎麼找? 目前CCL的範例可以在Harmony v3下找到SAME54-EK做的曼徹斯特編碼器範例 \HarmonyFramework\csp\apps\ccl\manchester_encoder 底下的SERCOM當inputs似乎比較像用byte方式送modulation signal, 但LUT的輸入怎麼選TC/TCC產生的125khz waveform? Serial Communication Output Transmit Inputs (SERCOM) The serial engine transmitter output from Serial Communication Interface (SERCOM TX, TXd for USART, MOSI for SPI) can be used as input source for the LUT. The figure below shows an example for LUT0 and LUT1. The SERCOM selection for each LUT follows the formula: IN
發表於: 2020/6/16 18:32
Edited by anthonyfu on 2020年06月16日 18:59:56
|
|||
|