:::
Browsing this Thread:
1 Anonymous Users
|
Re: 為什麼我沒辦法看到變數 ??
|
||||
|---|---|---|---|---|
|
中級會員
 
|
感謝 , 剛剛在 IDE 設定好了 , 果然就看的到了
發表於: 2005/9/28 10:07
|
|||
|
||||
|
Re: 為什麼我沒辦法看到變數 ??
|
||||
|---|---|---|---|---|
|
資深會員
|
 這個問題,以前好像有人問過了,如果你是用ICD2的話,請在IDE裡面有一個選項要勾選,COMPILER FOR USE WITH ICD DEBUGGER
發表於: 2005/9/28 9:17
|
|||
|
||||
|
為什麼我沒辦法看到變數 ??
|
||||
|---|---|---|---|---|
|
中級會員
|
#define __dsPIC30F4011__
#include <timer.h> #include "C:\pic30_tools\support\h\p30F4011.h" #define FCY 14745600 #define LED13 LATDbits.LATD0 #define LED14 LATDbits.LATD1 _FOSC(CSW_FSCM_OFF & HS); //XT with 4xPLL oscillator, Failsafe clock off _FWDT(WDT_OFF); //Watchdog timer disabled _FBORPOR(PBOR_OFF & MCLR_EN); //Brown-out reset disabled, MCLR reset enabled _FGS(CODE_PROT_OFF); //Code protect disabled /************* START OF MAIN FUNCTION ***************/ unsigned char LineCount = 0; char *msg1 = {"UART1-9600B EXAM"} ; int aaa=0,i=0,adr=0; int x[20]; void initial_LED(void) { TRISE = 0x00 ; PORTE = 0x00 ; } int main ( void ) { ADPCFG = 0XFF7F ; ADCON1 = 0 ; ADCON2 = 0 ; ADCON3 = 0X0002 ; ADCHS = 0X0007; ADCSSL = 0; ADCON1bits.ADON = 1; while (1) { ADCON1bits.SAMP = 1 ; for(i = 0 ; i < 100 ; i++) i++; if(i==100) i=0; ADCON1bits.SAMP = 0 ; while(!ADCON1bits.DONE) x[adr++]=ADCBUF0; if(adr==20) adr=0; } } 我要看 adr , i , x[] , 都沒辦法看到 .... watch 視窗顯示 "Restricted Memory" ....... 是我設定錯了嗎 ??
發表於: 2005/9/27 18:13
|
|||
|
||||
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
