Browsing this Thread:
1 Anonymous Users
|
dsPIC33F保護程式問題
|
|
初級會員
Joined
: 2009/3/2 11:52 最後登入時間
: 2011/1/13 8:33
Group:
註冊會員
Level : 4 HP : 0 / 80 MP : 10 / 3667 EXP : 22
|
請問我陷再要寫一個電壓保護的程式 條件為原本有2組PWM輸出,現在要加上當輸入電壓高於1.8V時,PWM不要輸出,要如何撰寫? 以下是保護程式的設定 在PWM INITIALIZATION下設定 /*---PWM1 INITIALIZATION---*/
IOCON1bits.FLTDAT=0; FCLCON1bits.FLTSRC=1; FCLCON1bits.FLTPOL=1; FCLCON1bits.FLTMOD=1;
/*---PWM2 INITIALIZATION---*/
IOCON2bits.FLTDAT=0; FCLCON2bits.FLTSRC=1; FCLCON2bits.FLTPOL=1; FCLCON2bits.FLTMOD=1;
/*---CMP1A Configuration---*/ CMPCON1bits.INSEL=0; CMPCON1bits.EXTREF=0; CMPCON1bits.RANGE=1; CMPDAC1bits.CMREF=931; CMPCON1bits.CMPON=1; CMPCON1bits.CMPPOL=1;
/*---CMP2A Configuration---*/ CMPCON2bits.INSEL=0; CMPCON2bits.EXTREF=0; CMPCON2bits.RANGE=1; CMPDAC2bits.CMREF=931; CMPCON2bits.CMPON=1; CMPCON2bits.CMPPOL=1;
/*---CMP3A Configuration---*/ CMPCON3bits.INSEL=0; CMPCON3bits.EXTREF=0; CMPCON3bits.RANGE=1; CMPDAC3bits.CMREF=931; CMPCON3bits.CMPON=1; CMPCON3bits.CMPPOL=1;
將上面的設定好之後就算沒有高於1.8v時也不會有PWM輸出 是哪裡有問題呢?
發表於: 2009/5/19 13:37
Edited by Ronald3112 on 2009年05月19日 13:59:47 Edited by Ronald3112 on 2009年05月19日 14:00:32 Edited by Ronald3112 on 2009年05月19日 14:01:13
|
|
You can view topic.
你 不可以 發起新主題
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.